Tubular poles is suitable for low voltage electric power transmission.
Suitable for its low wind resistance, easy to install and long working life.
Swaged type tubular poles:
Constructed of cold swaged joints of steel tubes jointed together by cold shrinking one end of larger tube and swaged to the end of the smaller tube with an over lab to form a firm grip that can sustain the required static and dynamic loads on the pole.
Advantages of tubular steel poles:
Wind load: due to curvature of the surface wind load is only about 60% of flat surface.
Strength: due to uniform distribution of metal in the cross section tubular poles gives the same strength in every direction
Corrosion resistance: due to smooth surface tubular poles has minimum liability to corrosion.
Installation: it is easy to install and light weight to handle.
Model
11 meter long Hot Dip Galvanizing

Poles are manufactured from Steel according to DIN 17100 – ST 52
Poles are fully hot dip galvanized after fabrication
Galvanizing thickness 650g/m2.
|
Part No. T11505
Swaged length (mm)
|
App. Length (mm)
|
OD x Thickness (mm)
|
Sectoin
|
|
2500
|
5.50 x 114
|
Top
|
300
|
3000
|
5.50 x 141
|
Middle
|
350
|
5500
|
5.50 x 166
|
Bottom
|
Part No. T11511
Swaged length (mm)
|
App. Length (mm)
|
OD x Thickness (mm)
|
Section
|
|
2500
|
114 × 4.40
|
Top
|
350
|
3000
|
141 × 4.40
|
Middle
|
420
|
5500
|
166 × 4.40
|
Bottom
|
|
9 meter long Hot Dip Galvanizing
- Poles are manufactured from Steel according to DIN 17100 – ST 52
- Poles are fully hot dip galvanized after fabrication
- Galvanizing thickness 650g/m2.
Part No. T09505
Swaged length (mm)
|
App. Length (mm)
|
OD x Thickness (mm)
|
Section
|
|
2000
|
89 × 5.00
|
Top
|
300
|
2300
|
114 × 5.00
|
Middle
|
350
|
4700
|
141 × 5.00
|
Bottom
|
Part No. T09508
Swaged length (mm)
|
App. Length (mm)
|
OD x Thickness (mm)
|
Section
|
|
2000
|
89 × 3.70
|
Top
|
300
|
2300
|
114 × 3.70
|
Middle
|
350
|
4700
|
141 × 3.70
|
Bottom
|