Hot Dip Galvanizing
With a very long experience of hot dip galvanizing since 80's , ASP Provides the service of general hot-dip galvanizing for any steel structure.
Hot Dip Galvanizing:
Hot Dip Galvanizing is a process of coating steel with a layer of zinc. Before the process can take place, the steel goes through a thorough chemical cleaning and special treatment of items surface. Then the steel is dipped into a bath of molten zinc that has been heated to around 450 °C.
Why Hot Dip Galvanizing?
- Corrosion Resistance Hot dip galvanizing protects steel from corrosion by providing a thick, tough, metallurgically bonded zinc to steel, which completely covers the steel surface and seals it from the corrosive action of its environment.
- Long life
The life expectancy of hot dip galvanizing excess of 50 years depend on environments exposed to.
- Lower maintenance cost
long life make galvanizing the most economical way of protecting steel for long periods. Hot dip galvanized coatings are self-maintaining, thicker. Hence maintenance costs are lower.
As hot dip galvanizing is carried out to meet standard: coating thicknesses, coating life and performance are reliable and predictable.
A full protection coating can be applied in hours; a complicated paint system can require a week.
- Coating toughness
A galvanized coating has a unique metallurgical structure which gives outstanding resistance to mechanical damage during handling, storage, transport and construction.
- Full coverage
Because steel is dipping in molten zinc, all parts of the surface of the steel are coated - inside, outside, awkward corners, and narrow gaps which would be impossible to protect in any other way.
- Automatic Protection for damaged areas Galvanized coating offer total protection, providing cathodic protection to small areas if steel exposed thtough damage to the coating.
- Quick Installation
Once material has been galvanized, there is no requirement for further preparation on site.
galvanizing unit Size: (12 M Length x 1.4 M Width x 1.8 M Depth), this unit is the biggest in Jordan with Annual capacity about 40,000 ton.
Galvanizing unit size: ( 7 M Length x 1.4 M Width x 1.6 M Depth) with Annual capacity about 15,000 ton.